Thread: 88-4mcs
View Single Post
  #4  
Old 06-25-2007, 02:47 AM
Grant Stockly Grant Stockly is offline
Administrator
 
Join Date: Jan 2005
Posts: 447
Default

Quote:
Originally Posted by sje View Post
Yes, I'm still considering ordering the 8800 kit. If it were the 8800b (with front panel) version, then there would be little hesitation.

How are the other cards (PROM and serial) coming along? I'd rather not have to scrounge around ebay to find these.
I would like to find a blank 8800B display/control board. I have the interface board in blank form.

The other cards are beautiful. I have tested the 2SIO and PMC boards. I've used the 2SIO board as a CP/M terminal and have transfered disks with it. I've used the PMC along with an EPROM programmer to make 1701s.

The only one I am waiting on is the 88-ACR cassette interface board. The SIOB is fine, but the MODEM board that goes with it uses some hard to find pots. Any pot would work, but wouldn't fit right.

I'm in Alabama right now but will be home on Tuesday. Remind me then to take some pictures of the pot. If you can find one that fits I might have to give you a discount!

I only have a few pictures of the new cards. They have not been resized and I did not take them for "quality". They are just pictures that I happened to take before I left.

Here are some teaser pictures:
Shot of 4MCS with only 1k of ram
http://www.stockly.com/images3/070503-4MCS_2313.jpg

Various new cards (I only sell MIL sockets with the kits, I'm using cheap sockets on the prototypes)
http://www.stockly.com/images3/07050...oards_2314.jpg

PMC testing, comparison of vintage PMCv1 to replica of a PMCv0
http://www.stockly.com/images3/07051...roPMC_2336.jpg

Vintage and replica 4MCS
http://www.stockly.com/images3/07051...mpare_2345.jpg

PMC with wire wrap ZIF sockets installed
http://www.stockly.com/images3/07060...8-PMC_2387.jpg
Reply With Quote